จำหน่าย นำเข้า ขาย เป็นตัวแทนจำหน่าย สินค้านิวแมติกคลัทช์-เบรค และอุปกรณ์ส่งกำลังอื่นๆของยี่ห้อ NEXEN จากประเทศสหรัฐอเมริกาสำหรับงานตัดต่อกำลังของมอเตอร์ ช่วยลดปัญหาการ start-stop บ่อยๆของมอเตอร์ สามารถรับแรงบิด (Torque) และความเร็วรอบ (RPM) ได้สูง
TSE-1000/3700 In. Lbs.
TSE-1200/5500 In. Lbs.
TSE-1400/8000 In. Lbs.
1800 rpm
◗ Thermal Horsepower rating of:
TSE-1000/3.0 @ 1800 rpm
TSE-1200/6.3 @ 1800 rpm
TSE-1400/ 12.5 @ 1800 rpm
◗ Heat Sink capacity of:
TSE-1000/200,000 Ft. Lbs.
TSE-1200/ 555,000 Ft. Lbs.
TSE-1400/ 650,000 Ft. Lbs.
F-450 & L-600
◗ Static Torque capacity up to:
F-450/140 In. Lbs. @ 80 psi
L-600/370 In. Lbs. @ 80 psi
◗ Maximum Operating Speed up to
3600 rpm
◗ Transmitted Horsepower values from:
F-450/0.125 to 5.00
L-600/0.25 to 10.00
◗ Thermal Horsepower rating of:
F-450/0.30 @ 3600 rpm
L-600/0.75 @ 3600 rpm
◗ Heat Sink capacity of:
F-450/30,000 Ft. Lbs.
L-600/60,000 Ft. Lbs.
8 F-450 & 8 L-600 Models offer design
flexibility:
◗ Sheave Mount Units:
F-450/4 in 1-“3V” or 1-“A” Groove
styles, each in 2 sizes
L-600/6, 4 sizes of 2-“3V” and 2 sizes
of 2-“A”
◗ 2 Pilot Mount units with different
standard bore sizes
◗ 2 Rewind Clutches Half-Torque,
Precise Interface. Standard or LOCO
facing, 0.875 bore size.
◗ Standard Bore Sizes:
F-450/0.750 and 0.875 inches
L-600/1.00 and 1.125 inches
◗ Customize the bore to your shaft diameter
with a Bushing or Coupling Half
◗ Includes:
F-450/Air Inlet Adapter and 8.25 in. hose.
L-600/8.25 inch hose.
◗ 1 802864 & 802865
Percision Interface Clutches.
For reduced puls
FRICTION CLUTCH MODELS
M-800 & H-1000
◗ Static Torque capacity up to:
M-800/975 In. Lbs. @ 80 psi
H-1000/2800 In. Lbs. @ 80 psi
◗ Maximum Operating Speed up to
1800 rpm
◗ Transmitted Horsepower values from:
M-800/0.50 to 10.00
H-1000/1.00 to 25.00
◗ Thermal Horsepower rating of:
M-800/1.00 @ 1800 rpm
H-1000/2.25 @ 1800 rpm
◗ Heat Sink capacity of:
M-800/110,000 Ft. Lbs.
H-1000/230,000 Ft. Lbs.
6 M-800 & 6 H-1000 Models offer
design flexibility:
◗ Sheave Mount Units:
M-800/2 sizes of 3-“3V” and 2 sizes of
2-“B” Groove styles.
H-1000/2 sizes of 3-“5V” and 2 sizes
of 2-“B”
◗ 2 Pilot Mount units with different
standard bore sizes
◗ Standard Bore Sizes:
M-800/1.438 and 1.625 inches
H-1000/1.688 and 1.875 inches
◗ Customize the bore to your shaft diameter
with a Bushing or Coupling Half
◗ Includes:
M-800/8.25 in. hose.
H-1000/8.25 inch hose
F-450 Pilot Mount 802850 -- 0.875 0.188 12
F-450 Pilot Mount, Rewind (Std) 802864 1 -- 0.875 0.188 10
F-450 Pilot Mount, Rewind (LOCO) 802865 1 -- 0.875 0.188 10
F-450 Pilot Mount 802855 -- 0.750 0.188 10
F-450 Sheave Mount 1-“3V” 802810 3.35 OD 0.875 0.188 10
F-450 Sheave Mount, 1-“3V” 802820 4.50 OD 0.875 0.188 11
F-450 Sheave Mount, 1-“A” 802830 3.80 PD 0.875 0.188 10
F-450 Sheave Mount, 1-“A” 802840 4.40 PD 0.875 0.188 10
L-600 Pilot Mount 805270 -- 1.125 0.250 17
L-600 Pilot Mount 805275 -- 1.000 0.250 17
L-600 Sheave Mount, 2-“3V” 805210 4.50 OD 1.125 0.250 18
L-600 Sheave Mount, 2-“3V” 805220 5.30 OD 1.125 0.250 19
L-600 Sheave Mount, 2-“3V” 805230 6.00 OD 1.125 0.250 21
L-600 Sheave Mount, 2-“3V” 805240 8.00 OD 1.125 0.250 25
L-600 Sheave Mount, 2-“A” 805250 4.40 PD 1.125 0.250 18
L-600 Sheave Mount, 2-“A” 805260 5.40 PD 1.125 0.250 20
Both Pilot w/Coupling Half Select a Pilot Mount and a Coupling Half to achieve this style of mou
Power transmission requires torque and Nexen products provide torque in a wide variety of clutches, brakes, torque limiters and coupling products. Nexen air actuated products are more efficient and economical than electrically actuated products of the same size. Air, unlike electricity, does not generate heat during engagement. Less heat allows greater torque transmission and efficiency. Nexen’s simple designs are easy to use and maintain. When properly applied these products have a long service life making the cost of ownership much less than competitive products.
Products Range
Clutch and Brake Combinations
Friction Clutch
Tooth Clutch
Torque Limiter
Air and Spring Engage Brake
Caliper Disk Brake
Rack and Pinion system
Rotary Indexing
Industries & Applications
การผลิตอาหาร
งานบรรจุ
งานสิ่งทอ
งานพิมพ์ / ควบคุมความตึง
งานตัดเหล็กแผ่น / ขึ้นรูปท่อ
ซีเมนต์ / กระดาษ / อิฐ / ยาง / กระจก
ยารักษาโรค
สร้างเครื่องจักรใหม่
